Assuming that you have a Roomba i6, the process of emptying it is actually quite simple. In just a few quick steps, you can have your Roomba I6 emptied and ready to go again.

Contents show

How to empty the iRobot Roomba i6? (Step-By-Step Guide)

The iRobot Roomba i6 is a great robot vacuum cleaner that is capable of cleaning floors quickly and easily. However, like all machines, it needs to be cleaned from time to time in order to keep it performing at its best.In this guide, we will show you how to empty the iRobot Roomba i6.

This guide is designed for people who are familiar with using a standard vacuum cleaner. If you are not familiar with using a vacuum cleaner, we recommend that you consult an expert before proceeding.

  1. Start by removing the dustbin from the Roomba I6. To do this, simply press the release button on the top of the unit and then lift the dustbin out.
  2. Next, take the filter out of the dustbin. The filter is located just below the dustbin lid and can be removed by simply pulling it out.
  3. With the filter removed, you can now dump the contents of the dustbin into the garbage. Be sure to tap the dustbin on the side to loosen any debris that may be stuck to the sides.
  4. Once the dustbin is empty, replace the filter and lid. To do this, simply reverse the steps you used to remove them.
  5. Finally, replace the dustbin on the Roomba I6. To do this, line up the release button on the dustbin with the corresponding button on the Roomba I6 and then push the dustbin down until it clicks into place.

How to empty Roomba i6 clean base?

Roomba i6

To empty the Roomba i6 clean base, first remove the dustbin. Then, open the clean base lid and press the release button. The clean base will open and the dirt will be emptied into the trash. Be sure to dispose of the dirt properly. Finally, close the lid and press the release button to close the clean base.

If your Roomba i6 fails to clean the base, you may need to empty the cleaning compartment.

Can we make Roomba i6 empty itself?

The answer is no, we cannot make Roomba i6 empty itself. But the Roomba i6+ learns your home to clean and schedule by room, unleashing powerful cleaning. CLEANS UP AFTER YOU, AND ITSELF – Forget about vacuuming for months at a time with the Clean Base Automatic Dirt Disposal that allows the i6+ to empty itself for up to 60 days.

How does Roomba i6+ self empty?

iRobot Roomba i6

Roomba i6+ has a lot of features that make it a top performer when it comes to vacuuming. One of the most important features is the way it self empties. 

First, remove the dustbin from the robot by pressing and holding the button on the front of the robot until it pops out.

Next, turn the robot upside down so that the bin is pointing downwards and use your hands to lift up one side of the bin lid.

The robot’s suction should hold it in place while you slide the other half of the lid off. Once both lids are off, you can see that there is a small round object at the bottom of the bin. This is where Roomba i6’s vacuum cleaner tube connects to. The object is tightly secured with two screws and needs to be removed before Roomba i6 self empties its bin.

To do so, first use a coin or a screwdriver to pry off one end of the small round object. Once it is freed, use your fingers to unscrew both screws from it. Once they are loose, place the object in.

When to empty the Roomba i6 Bin?

The Roomba i6 uses bin sensors to automatically detect when the bin is full and switches to the cleaning mode. When the bin is full, the Roomba will stop cleaning and will report this to the owner via the App or a messaging system.

There are two ways to Empty Roomba i6 Bin:1. Manual Cleaning: If you want to empty your Roomba i6 Bin manually, you can do so by following these simple steps.

To Empty Roomba i6 Bin Manually:

  • 1) Press and hold down the Clean button for 3 seconds until the red light turns off.
  • 2) Lift up on the front of the robot and unplug the dirt bin from its base.
  • 3) Lift out the dirt bin.
  • 4) Throw away the dirty debris in the trashcan.
  • 5) Plug in your robot and reattach the dirt bin.
  • 6) Press and hold down the Clean button until it starts blinking green repeatedly. The robot will now clean autonomously.

How often to empty the iRobot Roomba i6?

The iRobot Roomba i6 should be emptied after every use.

What do I do if Roomba i6 is not evacuating debris?

Roomba I6

If your Roomba i6 is not evacuating debris, there may be one or more of the following issues:

  • The roomba is stuck in a certain area – Make sure that the roomba can move freely around the room by pushing and pulling on the bristles on the front and sides of the machine.
  • If the roomba still cannot move, try cleaning the brushes with a cloth dampened with water.
  • The roomba does not have enough power – Make sure that you have replaced the batteries recently and that they are properly installed. If power is still an issue, try resetting the roomba by pressing and holding down both buttons for 3 seconds.
  • The debris chamber is clogged – Check to see if any debris is caught in the teeth of the debris chamber or at the bottom of the chamber opening. If debris is caught, clear it by gently pushing and pulling on one side of the chute until it pops out. If debris is preventing the chamber from opening completely, replace one of the rollers.
  • The roomba’s sensors are not working correctly – Try cleaning all of the sensors with a cloth dampened with water.

What do I do if Roomba i6 can not communicate with the Clean Base Automatic Dirt Disposal?

If your Roomba i6 can not communicate with the Clean Base Automatic Dirt Disposal, you can try the following steps:

  1. Check that the power cord for the Clean Base is plugged into a working outlet and that the Clean Base is powered on.
  2. Check that the Roomba i6 is powered on.
  3. Press and hold the Clean button on the Roomba i6 for two seconds. The Clean Base should emit a blue light and a beep to indicate that it is ready to receive the dirt from the Roomba i6.
  4. Press and hold the Dock button on the Roomba i6 for two seconds. The Roomba i6 should drive into the Clean Base and begin emptying its dirt bin.
  5. Once the Roomba i6 has finished emptying its dirt bin, it will emit a series of beeps to indicate that the process is complete. The Roomba i6 will then drive out of the Clean Base and resume cleaning.

The End

It’s no secret that the Roomba I6 is one of the most popular robotic vacuum cleaners on the market. If you’re looking to get your hands on one, but don’t know how to start, this guide is for you! In this article, we will walk you through each step of setting up and using your new Roomba I6, from unboxing it to getting it moving around your house.